Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TOUCH PANEL
- Check for foreign matter on the display.
OK: The display is clean.
NG: CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK: Go to Next Step
- Check for foreign matter on the display.
- CHECK TOUCH SWITCH (DISPLAY CHECK MODE)
- Enter the "Display Check" mode (Touch Switch Check) (See SYSTEM NORMAL CONDITION CHECK ).
- Touch the display in the area where the switch malfunction occurs.
OK: A "+" mark appears at the touched position.
NG: REPLACE NAVIGATION RECEIVER ASSEMBLY (See REMOVAL )
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )