LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Navigation/Multi-Info Display) >> Navigation Receiver >> Removal

Navigation Receiver: Removal

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  3. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See REMOVAL )
  9. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL  (See REMOVAL )
  10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY  (See REMOVAL )
  11. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      Fig 1: Locating Navigation Receiver Bolts
      G05156986Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull the navigation receiver as shown in the illustration to disengage the 3 clips on the backside of the navigation receiver.
    3. Disconnect the connectors and remove the navigation receiver.
      Fig 2: Pulling Navigation Receiver To Disengage Clips On Backside Of Navigation Receiver
      G05652708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE NO. 2 RADIO BRACKET 
    1. Remove the 4 bolts and bracket.
      Fig 3: Locating No. 2 Radio Bracket Bolts
      G05156988Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE NO. 1 RADIO BRACKET 
    1. Remove the 4 bolts and bracket.
      Fig 4: Locating No. 1 Radio Bracket Bolts
      G05156990Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals