LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Navigation/Multi-Info Display) >> Navigation System >> Map Display Incomplete >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK MAP DISC 
    1. Check that the map disc is not deformed or cracked.

      OK: No deformations or cracks on map disc. 

    NG: REPLACE MAP DISC 

    Fig 1: Checking Map Disc
    G05652628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    OK: Go to Next Step 

  2. CHECK NAVIGATION DISPLAY 
    1. Check that displays other than the navigation display are complete.

      OK: No other incomplete displays are found. 

    NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )

    OK: REPLACE NAVIGATION RECEIVER ASSEMBLY  (See REMOVAL  )