Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After the inspection is completed, clear the DTCs (See DTC CHECK/CLEAR ).
- CHECK IF A PROPER CD IS INSERTED
- Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.
OK: Normal CD
HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CD with adhesive paper labels should not be played.
- Commercial audio CDs can be played.
- CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
- MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
- For details on playable CDs, refer to the Owner's Manual .
NG: CD IS FAULTY
OK: Go to Next Step
- Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.
- REPLACE CD WITH ANOTHER AND RECHECK
- Replace the CD and recheck.
- Replace the CD with a normal one.
- Clear the DTCs (See DTC CHECK/CLEAR ).
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: REPLACE NAVIGATION RECEIVER ASSEMBLY (See REMOVAL )
OK: END
- Replace the CD and recheck.