Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After the inspection is completed, clear the DTCs (See DTC CHECK/CLEAR ).
- CHECK NAVIGATION RECEIVER ASSEMBLY
- Check if a disc can be inserted or ejected normally.
OK: A disc can be inserted or ejected normally.
NG: REPLACE NAVIGATION RECEIVER (See REMOVAL )
OK: Go to Next Step
- Check if a disc can be inserted or ejected normally.
- DTC CLEAR AND RECHECK
- Clear the DTCs (See DTC CHECK/CLEAR ).
- Recheck for DTCs and check if the same trouble occurs again.
OK: Same problem does not occur.
NG: REPLACE NAVIGATION RECEIVER ASSEMBLY (See REMOVAL )
OK: USE SIMULATION METHOD TO CHECK (See HOW TO PROCEED WITH TROUBLESHOOTING )