LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle - AF23-5) >> Repair Instructions >> Output Speed Sensor Installation

Output Speed Sensor Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply automatic transmission fluid to the new output speed sensor O-ring seal (63).
  2. Install the new output speed sensor O-ring seal (63) onto the output speed sensor (62).
  3. Install the output speed sensor (62) into the transmission case assembly (17).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the M6 x 1.0 x 16 mm output speed sensor bolt (61).

    Tighten 

    Tighten the output speed sensor bolt to 3.9-6.9 N.m (34.5-61.0 lb in).

    Fig 1: Installing Output Speed Sensor, O-Ring Seal & Bolt
    G02125811Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals