LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle - AF23-5) >> Repair Instructions >> Input Speed Sensor Installation

Input Speed Sensor Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply automatic transmission fluid to the new input speed sensor O-ring seal (71).
  2. Install the new input speed sensor O-ring seal (71) onto the input speed sensor (73).
  3. Install the input speed sensor (73) into the transmission case assembly (17).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the M6 x 1.0 x 16 mm input speed sensor bolt (72).

    Tighten 

    Tighten the input speed sensor bolt (72) to 3.9-6.9 N.m (34.5-61.0 lb in).

    Fig 1: Installing Input Speed Sensor, O-Ring Seal & Bolt
    G02125810Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals