Symptom Chart
NOTE:
- Always check remote controller battery before replacing remote controller.
- The panic alarm operation and the interior room lamp operation of multi-remote control system do not activate with the ignition key inserted in the key cylinder.
SYMPTOM CHART
| Symptom | Diagnosis/service procedure | Reference |
|---|---|---|
| All function of multi-remote control system do not operate. | 1. Remote controller battery check | REMOTE CONTROLLER BATTERY CHECK |
| 2. Power supply and ground circuit check | REMOTE CONTROLLER BATTERY CHECK | |
| 3. If above systems are OK, replace smart entrance control unit. | - | |
| The new ID of key fob cannot be entered. | 1. Key fob battery check | REMOTE CONTROLLER BATTERY CHECK |
| 2. Key switch circuit check | KEY SWITCH CIRCUIT CHECK | |
| 3. Front door switch (Driver side) circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 4. All door switch circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 5. ACC switch circuit check | REMOTE CONTROLLER BATTERY CHECK | |
| 6. Door lock/unlock switch circuit check | POWER WINDOW MAIN SWITCH (DOOR LOCK/UNLOCK SWITCH) CHECK | |
| 7. Power supply and ground circuit check | SYMPTOM CHART | |
| 8. If above systems are OK, replace smart entrance control unit. | - | |
| Door lock or unlock does not function. | 1. If the power door lock system does not operate manually, check power door lock system. | POWER DOOR LOCK SYSTEM |
| 2. Key switch circuit check | KEY SWITCH CIRCUIT CHECK | |
| 3. Front door switch (Driver side) circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 4. All door switch circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 5. Key fob battery check | REMOTE CONTROLLER BATTERY CHECK | |
| 6. If above systems are OK, replace smart entrance control unit. | - | |
| Hazard and horn reminder does not activate properly when pressing lock or unlock button of key fob. | 1. Key fob battery check | REMOTE CONTROLLER BATTERY CHECK |
| 2. Hazard reminder check | HAZARD REMINDER CHECK | |
| 3. Horn reminder check (Horn chirp can be activated or deactivated.)
NOTE:
First check the horn chirp setting. Refer to
"HAZARD AND HORN REMINDER "
|
HORN REMINDER CHECK | |
| 4. Front door switch (Driver side) circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 5. All door switch circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 6. If above systems are OK, replace smart entrance control unit. | - | |
| Interior room lamp operation does not activate properly. | 1. Interior room lamp operation check | HORN REMINDER CHECK |
| 2. Front door switch (Driver side) circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 3. All door switch circuit check | FRONT DOOR SWITCH (DRIVER SIDE) CIRCUIT CHECK | |
| 4. Key switch circuit check | KEY SWITCH CIRCUIT CHECK | |
| 5. If above systems are OK, replace smart entrance control unit. | - | |
| Panic alarm operation does not activate when panic alarm button is continuously pressed. (Horn reminder is OK.) | 1. Key fob battery check | REMOTE CONTROLLER BATTERY CHECK |
| 2. Key switch circuit check | KEY SWITCH CIRCUIT CHECK | |
| 3. If above systems are OK, replace smart entrance control unit. | - |