LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.5L Engine (Service Information) >> Oil Pressure Switch >> Installation

Oil Pressure Switch: Installation

  1. Apply Mopar(R) Thread Sealant to the switch threads.
  2. Install oil pressure switch to fitting (Figure ).
  3. Hold oil cooler fitting with a wrench and tighten oil pressure switch.
  4. Connect electrical connector (Figure ).
  5. Lower vehicle.
  6. Start engine and check for leaks.
  7. Check engine oil level and adjust as neccessary.
scientia non olet · About LEMON Manuals