Control Module: Installation
WARNING: This page is about a different car, the 2000 Volvo S80 and 1999 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Install control module using original screws. Tighten all bolts to 89 INCH lbs. (10 N.m).
- Turn ignition switch to ON position and connect negative battery cable. Check SRS warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK . If DTC exists after replacing control module, clear codes and perform SYSTEM OPERATION CHECK again. If SRS warning light still indicates a malfunction, enter self-diagnostics and retrieve DTCs. See DIAGNOSTICS .