Common Specs & Procedures
TACOMA COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SERVICE DATA [08/2015 - 09/2020] , or SERVICE DATA [09/2020 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - 09/2020] or TORQUE SPECIFICATIONS [09/2020 - ] | ||
| Axle Nut/Hub Nut | |||
| Front Axle Hub Nut (4WD) |
235 Nm (2396 kgf-cm, 173 lbf-ft.) | ||
| Front Wheel Adjusting Nut (2WD) | 275 Nm (2804 kgf-cm, 203 lbf-ft.) | ||
| Front Bearing Assy. Bolt | 80 Nm (816 kgf-cm, 59 lbf-ft.) | ||
| Rear Backing Plate/Hub Bolt | 45 Nm (459 kgf-cm, 33 lbf-ft.) | ||
| Battery | |||
| 2GR-FKS | SERVICE DATA [08/2015 - ] | ||
| 2TR-FE | SERVICE DATA [08/2015 - ] | ||
| Brakes | |||
| Bleeding Sequence | BRAKE FLUID (FOR HYDRAULIC BRAKE BOOSTER) or BRAKE FLUID (FOR VACUUM BRAKE BOOSTER) | ||
| Disc Brakes | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| Charging | |||
| 2GR-FKS | |||
| Generator | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| 2TR-FE | |||
| Generator | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| Drive Belts | |||
| 2GR-FKS | |||
| Adjustment | Engine equipped with belt tensioner. No adjustment necessary. ON-VEHICLE INSPECTION [08/2015 - ] | ||
| Belt Routing | INSTALLATION [08/2015 - ] | ||
| 2TR-FE | |||
| Adjustment | Engine equipped with belt tensioner. No adjustment necessary. ON-VEHICLE INSPECTION [08/2015 - ] | ||
| Belt Routing | INSTALLATION [08/2015 - ] | ||
| Engine Cooling | |||
| 2GR-FKS | |||
| General Service Specifications | SERVICE DATA [08/2015 - ] | ||
| Radiator Cap Pressure | Standard, 93 to 123 kPa (1.0 to 1.3 kgf/cm2
, 14 to 18 psi) Minimum, 79 kPa (0.8 kgf/cm2 , 11 psi) |
||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| 2TR-FE | |||
| General Service Specifications | SERVICE DATA [08/2015 - ] | ||
| Radiator Cap Pressure | Standard, 93 to 123 kPa (1.0 to 1.3 kgf/cm2
, 14 to 18 psi) Minimum, 79 kPa (0.8 kgf/cm2 , 11 psi) |
||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| 2GR-FKS | |||
| Compression | ON-VEHICLE INSPECTION [08/2015 - 09/2019] or ON-VEHICLE INSPECTION [09/2019 - ] | ||
| Oil Pressure | At idle: 29 kPa (0.3 kgf/cm2
, 4.2 psi) or more At 3000 RPM: 294 to 588 kPa (3.0 to 6.0 kgf/cm2 , 43 to 85 psi) |
||
| Overhaul | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | Torque: 83 Nm (846 kgf-cm, 61 lbf-ft.) | ||
| 2TR-FE | |||
| Compression | ON-VEHICLE INSPECTION [08/2015 - 11/2017] , or ON-VEHICLE INSPECTION [11/2017 - 09/2019] or ON-VEHICLE INSPECTION [09/2019 - ] | ||
| Oil Pressure | At idle: 29 kPa (0.3 kgf/cm2
, 4.2 psi) or more At 3000 RPM: 160 to 490 kPa (1.6 to 5.0 kgf/cm2 , 23 to 71 psi) |
||
| Overhaul | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | Torque: 74 N*m (755 kgf*cm, 55 ft.*lbf) | ||
| Fuel System | |||
| 2GR-FKS | |||
| Pressure Specification | Standard, 196 to 588 kPa (2.0 to 6.0 kgf/cm2
, 28 to 85 psi) Minimum, 147 kPa (1.5 kgf/cm2 , 21 psi) or more |
||
| Fuel Pressure Test Procedure | ON-VEHICLE INSPECTION [08/2015 - 11/2017] or ON-VEHICLE INSPECTION [11/2017 - ] | ||
| Fuel Filter Location | FUEL PUMP | ||
| 2TR-FE | |||
| Pressure Specification | Standard, 304 to 343 kPa (3.1 to 3.5 kgf/cm2
, 44 to 55 psi) Minimum, 147 kPa (1.5 kgf/cm2 , 21 psi) or more |
||
| Fuel Pressure Test Procedure | ON-VEHICLE INSPECTION [08/2015 - 11/2017] or ON-VEHICLE INSPECTION [11/2017 - ] | ||
| Fuel Filter Location | FUEL PUMP | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug | |||
| 2GR-FKS | |||
| DENSO FK20HBR8 | |||
| Gap | New Spark Plug: 0.7 to 0.8 mm (0.0276 to 0.0315 in.) Maximum Gap for Used Spark Plug - 1.1 mm (0.0433 in.) |
||
| Torque | 18 N*m (184 kgf*cm, 13 ft.*lbf) | ||
| 2TR-FE | |||
| DENSO FK20HR-A8 | |||
| Gap | New Spark Plug: 0.7 to 0.8 mm (0.0276 to 0.0315 in.) Maximum Gap for Used Spark Plug: - 1.1 mm (0.0433 in.) |
||
| Torque | Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) | ||
| Starting | |||
| 2GR-FKS | |||
| Starter | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| 2TR-FE | |||
| Starter | SERVICE DATA [08/2015 - ] | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| Wheel Alignment | |||
| Adjustment Specifications | SERVICE DATA [08/2015 - 11/2017] , SERVICE DATA [11/2017 - 09/2019] , SERVICE DATA [09/2019 - 09/2021] , or SERVICE DATA [09/2021 - ] . | ||
| Torque | TORQUE SPECIFICATIONS [08/2015 - ] | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 113 Nm (1152 kgf-cm, 83 lbf-ft.) | ||