Ignition Coil And Spark Plug: Installation: Installation

INSTALL SPARK PLUG
1. Install the 6 spark plugs.
  
  Fig 1: Installing Spark Plugs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
INSTALL IGNITION COIL ASSEMBLY
1. Install the 6 ignition coils with the 6 bolts.
  
  Fig 2: Removing/Installing Ignition Coils
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the 6 ignition coil connectors.
  
  Fig 3: Locating Ignition Coil Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 3 wire harness clamps.
  
  Fig 4: Locating Ignition Coil Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 SURGE TANK STAY . Refer to INSTALLATION - Step 20
INSTALL INTAKE AIR SURGE TANK ASSEMBLY . Refer to INSTALLATION - Step 5
INSTALL AIR CLEANER CAP WITH HOSE See step 2
ADD ENGINE COOLANT . Refer to REPLACEMENT - Step 5
INSPECT FOR ENGINE COOLANT LEAK . Refer to ON-VEHICLE INSPECTION - Step 1
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 101
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 102
INSTALL COWL TOP PANEL OUTER SUB-ASSEMBLY . Refer to INSTALLATION - Step 12
INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
1. Install the windshield wiper motor and link assembly. Refer to INSTALLATION .
INSTALL NO. 2 ENGINE UNDER COVER
INSTALL NO. 1 ENGINE UNDER COVER