LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Prius Plug-in >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Service Information) (Plug-In) >> Navigation Ecu >> Installation >> Installation

Navigation Ecu: Installation: Installation

  1. INSTALL EXTENSION MODULE 
    1. Connect the connector to install the extension module.
    2. Connect each connector to install the navigation wire.
  2. INSTALL NO. 2 RADIO BRACKET  . Refer to INSTALLATION - Step 3
  3. INSTALL NO. 1 RADIO BRACKET  . Refer to INSTALLATION - Step 4
  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET  . Refer to INSTALLATION - Step 5
  5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 27
  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH  . Refer to INSTALLATION - Step 28
  7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 30
  8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY  . Refer to INSTALLATION - Step 31
  9. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  10. INSTALL REAR NO. 3 FLOOR BOARD UPPER PLATE  . Refer to INSTALLATION - Step 3
  11. INSTALL DECK FLOOR BOX RH  . Refer to INSTALLATION - Step 4
  12. INSTALL REAR NO. 3 FLOOR BOARD  . Refer to INSTALLATION - Step 55
scientia non olet · About LEMON Manuals