LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Side Monitor System (Diagnostics - Introduction)) >> Side Monitor System >> Calibration >> Calibration

Side Monitor System: Calibration: Calibration

WARNING: This page is about a different car, the 2012 Lexus GX 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. ADJUST SIDE MONITOR SYSTEM 
    1. This side monitor system can be set from the diagnostic screen of the display and navigation module display*1 or accessory meter assembly*2.
      1. *1: w/ Navigation System
      2. *2: w/o Navigation System
    2. If the following operations are performed, it is necessary to perform adjustments and checks on the diagnostic screen.
      Part Name Operation Adjustment Item Proceed to
      Parking assist ECU Replacement Parking assist ECU initialization Refer to CALIBRATION
      • Front passenger side television camera assembly
      • Driver side television camera assembly*3
      • Replacement
      • Removal and installation of the side television camera, etc. resulting in side television camera installation angle change
      Side television camera installation correctly -
      • Front passenger side outer rear view mirror assembly
      • Driver side outer rear view mirror assembly*3
      Replacement Side television camera installation correctly -
      1. *3: w/ Multi-terrain Monitor

      HINT: 

      The adjustment values stored while performing side monitor system calibration are stored in the parking assist ECU.

  2. PARKING ASSIST ECU INITIALIZATION 
    1. Start diagnostic mode. Refer to DIAGNOSIS SYSTEM .