VSC OFF SWITCH (w/ VSC): Inspection: Inspection

INSPECT VSC OFF SWITCH

Measure the resistance according to the value(s) in the table below.

Fig 1: Inspecting VSC OFF Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
3 - 6	Released	10 kΩ or higher
3 - 6	Pushed in	Below 25 Ω

Check illumination operation.

Standard

Tester Connection	Condition	Specified Condition
4 - 5	Battery positive (+) lead connected to terminal 5 and negative (-) lead to terminal 4	LED illuminates

If the result is not as specified, replace the VSC OFF switch.