LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Navigation/Multi-Info Display) >> Navigation System >> Cursor or Map Rotates when Vehicle Stopped >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDITION 
    1. Check with the customer if the vehicle has been turned by a turntable at parking.

      OK: Vehicle has not been turned by turntable. 

      HINT:

      If the ignition switch is turned to ON or ACC while the vehicle is being turned by a turntable, the system may store the angular velocity at this time. For this reason, the vehicle position cursor may deviate.

    NG: TURN IGNITION SWITCH TO ON WHEN VEHICLE IS COMPLETELY STOPPED 

    Fig 1: Checking Vehicle Condition
    G05652615Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )