Inspection Procedure
WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After the inspection is completed, clear the DTCs.
NOTE:
- This code may be output even if there is no malfunction.
- If this code is output frequently, replace the navigation receiver assembly.
- CLEAR DTC
- Clear the DTCs (See DTC CHECK / CLEAR ).
- RECHECK FOR DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: The same trouble does not occur.
NG: REPLACE NAVIGATION RECEIVER ASSEMBLY (See REMOVAL )
OK: END
- Recheck for DTCs and check if the same trouble occurs again.