Cruise Control Main Switch: Inspection
- INSPECT CRUISE CONTROL MAIN SWITCH
- Remove the cruise control main switch (See CRUISE CONTROL MAIN SWITCH ).
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Switch Condition Specified Condition 3 (CCS) - 1 (ECC) Neutral 10 kΩ or higher 3 (CCS) - 1 (ECC) + (ACCEL)/RES (RESUME) 216 to 264 Ω 3 (CCS) - 1 (ECC) - (COAST)/SET 567 to 693 Ω 3 (CCS) - 1 (ECC) CANCEL 1386 to 1694 Ω 3 (CCS) - 1 (ECC) Main switch on Below 1.0 Ω If the result is not as specified, replace the cruise control main switch.