LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Avalon XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Lighting) >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STOP LIGHT SWITCH ASSEMBLY 
    1. Inspect the stop light switch assembly.
      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance 

        RESISTANCE SPECIFICATION

        Tester Connection Switch Condition Specified Condition
        1 - 2 Switch pin free Below 1 Ω
        Switch pin pushed in 10 kΩ or higher
        3 - 4 Switch pin free 10 kΩ or higher
        Switch pin pushed in Below 1 Ω
        Fig 1: Inspecting Stop Light Switch Assembly
        G04963186Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals