Height Control Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Installation is in the reverse order of removal.

REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH
1. Disconnect the connector.
2. Place matchmarks with the one on the height control sensor sub-assembly rear RH and bracket.
3. Remove a nut.
  
  Fig 1: Locating Height Control Sensor Rear Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 nuts and height control sensor sub-assembly rear RH.