LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Matrix Base, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Seat Position Sensor >> Removal

Seat Position Sensor: Removal

  1. PRECAUTION 
    CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (See PRECAUTION  ).
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
  3. REMOVE FRONT SEAT ASSEMBLY LH  (See REMOVAL )
  4. REMOVE FRONT SEAT CUSHION SHIELD LH  (See REMOVAL )
  5. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR 
    1. Remove the seat slide position sensor protector from the seat position sensor.
  6. REMOVE SEAT POSITION SENSOR 
    1. Disconnect the connector from the seat position sensor.
      Fig 1: Identifying Connector From Seat Position Sensor
      G05005343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a "TORX" socket wrench (T30), remove the "TORX" screw and the seat position sensor.
    Fig 2: Identifying Seat Position Sensor With Torx Screw
    G05236658Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals