Service Data
SERVICE DATA SPECIFICATION
| Starter assembly | Standard current: 90 A or less at 11.5 V |
|---|---|
| Repair service starter kit | Standard resistance Terminal 50 - Terminal C: Below 1 Ω Terminal 50 - Switch body: Below 2 Ω |
| Starter armature assembly | Standard resistance Segment - Segment: Below 1 Ω Segment - Coil core: 10 kΩ or higher |
| Standard length: 3.1 to 3.8 mm (0.122 to 0.150 in.) | |
| Starter commutator end frame | Standard length: 4.0 to 9.0 mm (0:158 to 0.354 in.) |
| Standard resistance Positive (+) - Negative (-): 10 kΩ or higher |
|
| Snap ring | Maximum length: 5.0 mm (0.197 in.) |
| Starter relay | 3 - 5: 10 MΩ or higher 3 - 5: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| Starter cut relay | 3 - 5: 10 MΩ or higher 3 - 5: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| ACC relay | 3 - 5: 10 kΩ or higher 3 - 5: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| No.1 ignition relay | 3 - 5: 10 kΩ or higher 3 - 5: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| No.2 ignition relay | 3 - 5: 10 kΩ or higher 3 - 5: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| Ignition switch | LOCK: Between all terminals 10 kΩ or higher ACC: 4 (AM1) - 2 (ACC) Below 1 Ω ON: 4 (AM1) - 2 (ACC) Below 1 Ω ON: 4 (AM1) - 1 (IG1) Below 1 Ω ON: 5 (AM2) - 6 (IG2) Below 1 Ω START: 4 (AM1) - 1 (IG1) Below 1 Ω START: 4 (AM1) - 3 (ST1) Below 1 Ω START: 5 (AM2) - 6 (IG2) Below 1 Ω START: 5 (AM2) - 7 (ST2) Below 1 Ω |
| Engine switch | 7 (SS1) - 5 (GND) / 2 (SS2) - 5 (GND) Specified resistance Not pushed: 10 kΩ or higher Pushed: 15 Ω |
| Standard condition: Illuminates Measurement condition Battery positive 11 (SWIL) - Battery negative 4 (COM) or 5 (GND) Battery positive 12 (INDS) - Battery negative 4 (COM) or 5 (GND) Battery positive 13 (INDW) - Battery negative 4 (COM) or 5 (GND) |