LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

  1. INSPECT STOP LIGHT SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION - SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1 - 2 Switch pin not pushed Below 1
      3 - 4 Switch pin not pushed 10 k or higher
      1 - 2 Switch pin pushed 10 k or higher
      3 - 4 Switch pin pushed 10 k or higher

      If the result is not as specified, replace the switch assembly.

      Fig 1: Inspecting Stop Light Switch Assembly
      G04475895Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals