LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering >> Vane Pump >> Removal

Vane Pump: Removal

NOTE:
  • When using a vise, do not overtighten.
  • When installing, coat the parts indicated by the arrows with power steering fluid (See VANE PUMP  ).
  1. REMOVE FRONT WHEEL RH 
  2. DRAIN POWER STEERING FLUID 
  3. REMOVE ENGINE UNDER COVER RH 
  4. REMOVE FAN AND GENERATOR V BELT 
  5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO. 1 
    1. Remove the clip and disconnect the oil reservoir to pump hose No. 1.
  6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY 
    1. Using SST, disconnect the pressure feed tube assembly.

      SST 09023-38401 

    2. Remove the bolt and disconnect the pressure feed tube clamp.
      Fig 1: Locating Pressure Feed Tube Clamp
      G05236101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE VANE PUMP ASSEMBLY 
    1. Disconnect the oil pressure switch connector.
    2. Remove the 2 bolts, nuts and vane pump assembly.
scientia non olet · About LEMON Manuals