LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Camshaft Timing Oil Control Valve Assembly >> Removal

Camshaft Timing Oil Control Valve Assembly: Removal

  1. REMOVE ENGINE ROOM SIDE LH COVER NO.2  (See REMOVAL )
  2. REMOVE AIR CLEANER CAP W7 INLET (See  REMOVAL  ) 
  3. REMOVE AIR CLEANER CASE W7 RESONATOR (See  REMOVAL  ) 
  4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
      Fig 1: Locating Oil Control Valve Bolt (For Bank 1)
      G05200219Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
      3. Fig 2: Locating Oil Control Valve Bolt (For Bank 2)
      G05200220Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals