LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2AZ-FE) (Except Hybrid) >> Circuit Opening Relay >> Inspection

Circuit Opening Relay: Inspection

  1. INSPECT CIRCUIT OPENING RELAY 
    1. Remove the circuit opening relay from the R/B sub-assembly.
    2. Measure the resistance of the relay.
      Fig 1: Inspecting Circuit Opening Relay
      G05245523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Resistance 

      TESTER CONNECTION AND SPECIFIED CONDITION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (when battery voltage Is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

scientia non olet · About LEMON Manuals