LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Control System (3MZ-FE)) >> VVT Sensor >> Installation

VVT Sensor: Installation

WARNING: This page is about a different car, the 2006 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VVT SENSOR 
    1. Apply a light coat of engine oil to the O-ring on the VVT sensor.
    2. Install the 2 VVT sensors with the 2 bolts.

      Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf) 

    3. Connect the 2 VVT sensor connectors.
  2. INSTALL AIR CLEANER ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL NO. 2 AIR CLEANER INLET (See  INSTALLATION  ) 
scientia non olet · About LEMON Manuals