Section 17 (Engine Control System (3MZ-FE)): ECM: Installation
WARNING: This page is about a different car, the 2006 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ECM
- Install the No. 2 ECM bracket with the 2 screws.
Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
- Install the ECM bracket with the 2 screws.
Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
- Install the ECM with the 2 nuts.
Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
- Connect the 5 ECM connectors.
- Install the No. 2 ECM bracket with the 2 screws.
- INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY