Problem Symptoms Table
HINT:
- Before performing verification listed in the table below, check the fuse and relay.
- Methods used to verify the cause of the problem are listed in order of probability in the verification column.
Display function
PROBLEM SYMPTOMS TABLE - DISPLAY FUNCTION
| Symptom |
Verification |
| Black screen (No image appears on navigation/audio screen). |
- "BLACK SCREEN (NO IMAGE APPEARS ON NAVIGATION AND AUDIO SCREEN)"
- Illumination circuit
- Power source circuit (multi-display)
- Replace multi-display
|
| Illumination for panel switch does not come on with TAIL switch on. |
- "ILLUMINATION FOR PANEL SWITCH DOES NOT COME ON WITH TAIL SWITCH ON"
- Illumination circuit
- Replace multi-display
|
| Display does not dim (Night Screen) with TAIL switch on. |
- "DISPLAY DOES NOT DIM (NIGHT SCREEN) WITH TAIL SWITCH ON"
- Illumination circuit
- Replace multi-display
|
| Power does not turn off (The screen remains on). |
- Power source circuit (multi-display)
- Replace multi-display
|
| Panel switch does not function. |
- "PANEL SWITCH DOES NOT FUNCTION"
- Steering pad switch circuit
- Power source circuit (multi-display)
- Replace multi-display
|
| Touch panel switch does not function. |
- "TOUCH PANEL SWITCH DOES NOT FUNCTION"
- Steering pad switch circuit
- Power source circuit (multi-display)
- Replace multi-display
|
| Screen is distorted. |
- Display signal circuit (navigation ECU - multi-display)
- Replace navigation ECU
- Replace multi-display
|
| Screen flicker or color distortion. |
- "SCREEN FLICKER OR COLOR DISTORTION"
- Display signal circuit (navigation ECU - multi-display)
- Replace navigation ECU
- Replace multi-display
|
| No switches function while vehicle is running |
- Speed signal circuit (multi-display - combination meter assy)
|
Navigation function
PROBLEM SYMPTOMS TABLE - NAVIGATION FUNCTION
| Symptom |
Verification |
| Map disc cannot be inserted. |
- "MAP DISC CANNOT BE INSERTED"
- Power source circuit (navigation ECU)
- Replace navigation ECU
|
| Map disc cannot be ejected. |
- Power source circuit (navigation ECU)
- Replace navigation ECU
|
| Vehicle position mark deviates greatly. |
- "VEHICLE POSITION MARK DEVIATES GREATLY"
- Replace GPS antenna assy
- Replace navigation ECU
|
| Cursor or map rotates when vehicle is stopped. |
- "CURSOR OR MAP ROTATES WHEN VEHICLE IS STOPPED"
- Replace navigation ECU
|
| Vehicle position mark is not updated. |
- "VEHICLE POSITION MARK IS NOT UPDATED"
- Replace map disc
- Replace navigation ECU
|
| Current position display does not appear. |
- "CURRENT POSITION DISPLAY DOES NOT APPEAR"
- Replace map disc
- Replace navigation ECU
|
| GPS mark is not displayed. |
- "GPS MARK IS NOT DISPLAYED"
- Replace GPS antenna assy
- Replace navigation ECU
|
| Voice guidance does not function. |
- "VOICE GUIDANCE DOES NOT FUNCTION"
- Mute signal circuit (stereo component amplifier assy -navigation ECU)
- Speaker circuit (navigation voice)
- Replace map disc
- Replace stereo component amplifier assy
- Replace navigation ECU
|
| Map display incomplete |
- "MAP DISPLAY INCOMPLETE"
- Replace map disc
- Replace navigation ECU
|
| Route cannot be calculated. |
- "ROUTE CANNOT BE CALCULATED"
- Replace map disc
- Replace navigation ECU
|
| Voice recognition difficulty |
- "VOICE RECOGNITION DIFFICULTY"
- Replace navigation ECU
|
| Voice is not recognized. |
- "VOICE IS NOT RECOGNIZED"
- Microphone circuit (overhead J/B-multi-display)
- Microphone circuit (multi-display-navigation ECU)
- Replace microphone
- Replace microphone amplifier
- Replace navigation ECU
- Replace multi-display
|
Steering pad function
PROBLEM SYMPTOMS TABLE - STEERING PAD FUNCTION
| Symptom |
Verification |
| Voice navigation cannot be operated with steering pad switch. |
- Steering pad switch circuit
- Replace steering pad switch LH RH
- Replace navigation ECU
|
Bluetooth function
PROBLEM SYMPTOMS TABLE - BLUETOOTH FUNCTION
| Symptom |
Verification |
| Cellular phone registration failure, phone directory transfer failure |
- "CELLULAR PHONE REGISTRATION FAILURE, PHONE DIRECTORY TRANSFER FAILURE"
|
| The cellular phone cannot send/receive. |
- "THE CELLULAR PHONE CANNOT SEND/RECEIVE"
- "OWN VOICE CANNOT BE HEARD, TOO QUIET OR DISTORTED"
- Cellular phone voice circuit (multi-display - navigation ECU)
- Replace navigation ECU
- Replace multi-display
|
| Cannot call in a certain place. |
- "CANNOT CALL IN A CERTAIN PLACE"
|
| Voice on phone cannot be heard, too quiet, or distorted. |
- "VOICE ON PHONE CANNOT BE HEARD, TOO QUIET OR DISTORTED"
- Cellular phone voice circuit (multi-display - navigation ECU)
- Replace navigation ECU
- Replace multi-display
|
| Own voice cannot be heard, too quiet or distorted. |
- "OWN VOICE CANNOT BE HEARD, TOO QUIET OR DISTORTED"
|