LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Tundra Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 477 (Body Control Systems - Diagnostics) >> Body Control System >> Circuit Inspection >> Cargo Light Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Tundra and 2005 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check cargo light switch (See  INSPECTION  ). 
    1. NG: Replace cargo light switch. 
    2. OK: Go to next step 
  2. Check wire harness and connector between cargo light switch and body ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG: Repair or replace wire harness and connector. 
    2. OK: Proceed to next circuit inspection shown on  PROBLEM SYMPTOMS TABLE   . 
scientia non olet · About LEMON Manuals