Park/Neutral Position Switch (A/T) Test
Disconnect park/neutral position switch connector at transmission. Using an ohmmeter, check for continuity between switch terminals. See PARK/NEUTRAL POSITION SWITCH (A/T) SPECIFICATIONS table. See Fig 1. If continuity is not as specified, replace switch.
PARK/NEUTRAL POSITION SWITCH (A/T) SPECIFICATIONS
| Gearshift Lever Position | Continuity Between Terminals |
|---|---|
| Park | "B" & "N"; "C" & "PL" |
| Reverse | "C" & "RL" |
| Neutral | "B" & "N"; "C" & "NL" |
| Drive | "C" & "DL" |
| 2 | "C" & "2L" |
| Low | "C" & "LL" |