LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1991 >> Cressida >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - System/Component Tests) >> Relays >> Circuit Opening Relay

Circuit Opening Relay

WARNING: This page is about a different car, the 1991 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Circuit opening relay is located behind center of dash. To check circuit opening relay, See Fig 1 and Fig 2. Replace relay if continuity is not as specified.

NOTE: During cranking, there should be 12 volts present at FP terminal of circuit opening relay. This is the fuel pump (or fuel pump relay) line. See WIRING DIAGRAMS article in the ENGINE PERFORMANCE Section for wire color.
Fig 1: Circuit Opening Relay Continuity Check
G118918Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Circuit Opening Relay Operation Check
G118919Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002