Read Current Data

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System».
On «Select System» display, select «DCCD».
On «Select Function» display, select «Data Monitor».

Display

Item

Unit of measure

Ignition SW ON Count

Total number of ignition switch ON

times

Count

Counter

Time Count

Elapsed time after ignition switch ON

Battery Voltage

Battery voltage

DCCD Mode

AUTO selection mode

⁽¹⁾

DCCD Torque Allocation

Manual mode torque distribution

⁽²⁾

C-Diff. Real Current

Center differential actual current

C-Diff. Indicate Current

Center differential indicator current

Center Diff. Relay

Center differential relay ON instruction

ON or OFF

AUTO/MANUAL Mode Switch

Mode change switch

ON or OFF

Up Switch

C.DIFF + switch

ON or OFF

Down Switch

C.DIFF - switch

ON or OFF

FR Wheel Speed

Front vehicle speed sensor (RH)

km/h or MPH

FL Wheel Speed

Front vehicle speed sensor (LH)

km/h or MPH

RR Wheel Speed

Rear vehicle speed sensor (RH)

km/h or MPH

RL Wheel Speed

Rear vehicle speed sensor (LH)

km/h or MPH

Steering Angle Sensor

Steering angle

deg

Yaw Rate

Yaw rate

deg/s

Lateral G

Lateral acceleration

m/s-2

Stop Light Switch

Stop light switch signal

ON or OFF

Parking Position Switch

Parking switch

ON or OFF

Accel opening angle

Accelerator position

Engine Speed

Engine speed signal

rpm

Neutral switch

Neutral signal

Neutral or Other than Neutral

Rear Diff. Oil Temp Lamp

Rear differential oil temperature warning light

OFF or Other than Turn Off

⁽¹⁾	Displayed by the number

0 in the manual mode
1 in AUTO [-]/2 in AUTO/3 in AUTO [+]

⁽²⁾	Displayed by the number

0 in AUTO mode
1, 2, 3, 4, 5, 6 in manual mode

NOTE: For detailed operation procedures, refer to "Application help".