LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System (Service Information) >> Radar Sensor >> Installation

Radar Sensor: Installation

  1. Install the radar bracket.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Install the radar sensor.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  3. Install the bumper face - rear.
  4. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  5. Perform the adjustment of the radar sensor radar axis. < Ref. to RADAR AXIS ADJUSTMENT , ADJUSTMENT, Radar Sensor. >
scientia non olet · About LEMON Manuals