LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Instrumentation System & Driver Information Center) >> Combination Meter System >> Operation >> TFT display check

TFT display check

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Check the TFT display.

NOTE:
  • The meter needle indicate 0 or the lowest position.
  • ILL indication illuminates at the same brightness as immediately before entering "TFT display check".
  • After No. 6 is displayed in the illumination order, display is repeated from No. 1 again.
  • The version display contents of the illumination order No. 1 varies depending on the vehicle.
  1. Press the trip reset switch.
  2. After a buzzer sounds for 0.5 seconds and "STEP3" is displayed on TFT, the TFT display check mode is initiated.
    Order TFT display Warning/indicator light Time (sec)
    1 Version display & black Light OFF 10
    2 Red Light OFF 10
    3 Green Light OFF 10
    4 Blue Light OFF 10
    5 White Light OFF 10
    6 Color gradation Light OFF 10
scientia non olet · About LEMON Manuals