Extension Assembly
Preload of the taper roller bearing (amount of standard protrusion): 0.15 - 0.25 mm (0.006 - 0.010 in)
NOTE:
Be sure that the amount of preload is within the standard value.
THRUST WASHER REFERENCE
| Thrust washer (50 x 61 x t) | |
|---|---|
| Part number | Thickness mm (in) |
| 803050060 | 0.50 (0.0197) |
| 803050061 | 0.55 (0.0217) |
| 803050062 | 0.60 (0.0236) |
| 803050063 | 0.65 (0.0256) |
| 803050064 | 0.70 (0.0276) |
| 803050065 | 0.75 (0.0295) |
| 803050066 | 0.80 (0.0315) |
| 803050067 | 0.85 (0.0335) |
| 803050068 | 0.90 (0.0354) |
| 803050069 | 0.95 (0.0374) |
| 803050070 | 1.00 (0.0394) |
| 803050071 | 1.05 (0.0413) |
| 803050072 | 1.10 (0.0433) |
| 803050073 | 1.15 (0.0453) |
| 803050074 | 1.20 (0.0472) |
| 803050075 | 1.25 (0.0492) |
| 803050076 | 1.30 (0.0512) |
| 803050077 | 1.35 (0.0531) |
| 803050078 | 1.40 (0.0551) |
| 803050079 | 1.45 (0.0571) |
Thrust washer to center differential side clearance: 0.15 - 0.35 mm (0.0059 - 0.0138 in)
THRUST WASHER REFERENCE
| Thrust washer | |
|---|---|
| Part number | Thickness mm (in) |
| 803036050 | 0.9 (0.035) |
| 803036054 | 1.0 (0.039) |
| 803036051 | 1.1 (0.043) |
| 803036055 | 1.2 (0.047) |
| 803036052 | 1.3 (0.051) |
| 803036056 | 1.4 (0.055) |
| 803036053 | 1.5 (0.059) |
| 803036057 | 1.6 (0.063) |
| 803036058 | 1.7 (0.067) |