Pitching Stopper

WARNING: This page is about a different variant/trim than selected.

Install the pitching stopper.
Tightening torque:

T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

Fig 1: Identifying Pitching Stopper Nut Tightening Torque
Courtesy of SUBARU OF AMERICA, INC.
Install the intercooler. (Turbo model) < Ref. to INSTALLATION , Intercooler. >
Install the air intake chamber. (Non-turbo model) < Ref. to INSTALLATION , Air Intake Chamber. >
Connect the battery ground cable to the battery.