LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Fuel Injection System (H6DO)) >> Oil Temperature Sensor >> Removal

Oil Temperature Sensor: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Removing Collector Cover
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake chamber. <Ref. to REMOVAL , Air Intake Chamber .>
  4. Disconnect the connector from the oil temperature sensor.
  5. Remove the oil temperature sensor.
    Fig 2: Locating Oil Temperature Sensor
    G05018469Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals