Read Current Data
- On the «Main Menu» display screen, select {Each System Check}.
- On the «System Selection Menu» display screen, select the {Brake Control}.
- Select the [OK] after {ABS} is displayed.
- On the «Brake Control Diagnosis» display screen, select the {Current Data Display/Save}.
- On the «Display Menu» screen, select the data display method.
- Using the scroll key, scroll the display screen up or down until necessary data is shown.
- A list of the support data is shown in the following table.
SUBARU SELECT MONITOR DISPLAY REFERENCE
| Display | Contents to be monitored | Unit of measure |
|---|---|---|
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| BLS Signal | Brake ON/OFF is displayed. | ON or OFF |
| G Sensor | Vehicle acceleration detected by analog G sensor is displayed. | m/s (m/s2 ) |
| Valve Relay Signal | Valve relay operation signal is displayed. | ON or OFF |
| ABS Warning Light | ON operation of the ABS warning light is displayed. | ON or OFF |
| EBD Warning Light | ON operation of the EBD warning light is displayed. | ON or OFF |
| Motor Relay Monitor | Motor relay monitor voltage is displayed. | V |
| IG power supply voltage | Voltage supplied to ABSCM & H/U is displayed. | V |
| ABS Control Flag | ABS control condition is displayed. | ON or OFF |
| ABS OK B Signal | ABS system normal/abnormal is displayed. | OK or NG |
NOTE:
For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".