LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Cooling System (H6DO)) >> Radiator >> Installation

Section 25 (Cooling System (H6DO)): Radiator: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Attach the radiator lower cushions to holes on the vehicle.
    Fig 1: Identifying Radiator
    G05018883
  2. Install the radiator to vehicle.
    NOTE: Make pins on the lower side of radiator be fitted into the radiator lower cushions on body side.
  3. Install the radiator upper brackets and tighten the bolts.

    Tightening torque: 

    12 N.m (1.2kgf-m, 8.9 ft-lb) 

  4. Connect the radiator hose.
    Fig 2: Identifying Radiator Hose And Radiator Upper Brackets
    G05018884
  5. Install the reservoir tank. < Ref. to INSTALLATION , Reservoir Tank. >
  6. Connect the connector to the radiator fan control unit.
    Fig 3: Locating Radiator Fan Control Unit Connector
    G05018881
  7. Install the air intake duct.

    < Ref. to INSTALLATION , Air Intake Duct. >

  8. Install the hood stay holder.
    Fig 4: Locating Hood Stay Holder
    G05018880
  9. Lift-up the vehicle.
  10. Connect the ATF cooler hoses.
    Fig 5: Locating ATF Cooler Hose
    G05018879
  11. Connect the radiator hose.
    Fig 6: Locating Radiator Hose
    G05018873
  12. Install the under cover.
  13. Lower the vehicle.
  14. Connect the battery ground cable to battery.
    Fig 7: Connecting Ground Cable To Battery
    G05019586
  15. Fill engine coolant. < Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >
  16. Check the ATF level.

    < Ref. to INSPECTION , Automatic Transmission Fluid. >

  17. Install the collector cover.
scientia non olet · About LEMON Manuals