Rear Finisher Light Assembly: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Remove tail gate tray. < Ref. to REMOVAL , TAIL GATE TRAY. >
Remove tail gate cover.

Fig 1: Identifying Tail Gate Cover
Courtesy of SUBARU OF AMERICA, INC.
Separate connector. Remove nuts and detach rear finisher light.

Fig 2: Identifying Rear Finisher Light Nuts
Courtesy of SUBARU OF AMERICA, INC.