Function Check

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Integ. Unit mode} and press the [YES] key.
On the << Integ. Unit mode failure diag >> display screen, select the {System Operation Check Mode} and press the [YES] key.
Select item to operate on the << System Operation Check Mode >> display screen with "UP/Down key", and press the [YES] key.

Fig 1: Identifying Screen Display -Function Check
Courtesy of SUBARU OF AMERICA, INC.
Pressing [YES] starts, [NO] cancels the operation and [YES] returns to the System Operation Check Mode display screen.

NOTE: If not equipped (based on area or condition), process will not go on.