Lubrication (H6DO): General Description: Specifications
LUBRICATION METHOD SPECIFICATIONS
| Lubrication method | Forced lubrication | |||
|---|---|---|---|---|
| Oil pump | Pump type | Trochoid type | ||
| Number of teeth | Inner rotor | 9 | ||
| Outer rotor | 10 | |||
| Outer rotor diameter x thickness | 78 x 11 mm (3.07 x 0.43 in) | |||
| Tip clearance between inner and outer rotors | STANDARD | 0.04-- 0.14 mm (0.0016 - 0.0055 in) | ||
| LIMIT | 0.20 mm (0.0079 in) | |||
| Side clearance between inner rotor and pump case | STANDARD | 0.02 - 0.08 mm (0.0008 - 0.0031 in) | ||
| LIMIT | 0.15 mm (0.0059 in) | |||
| Case clearance between outer rotor and pump case | STANDARD | 0.11 - 0.18 mm (0.0043 - 0.0071 in) | ||
| LIMIT | 0.25 mm (0.0098 in) | |||
| Oil filter | Type | Full-flow filter type | ||
| Filtration area | 1,300 cm2 (201.5 sq in) | |||
| By-pass valve opening pressure | 160 kPa (1.63 kg/cm2 , 23 psi) | |||
| Outer diameter x width | 80 x 75 mm (3.15 x 2.95 in) | |||
| Oil filter to engine thread size | M20x 1.5 | |||
| Relief valve operation pressure | 588 kPa (6 kg/cm2 , 185 psi) | |||
| Oil pressure Switch | Type | Immersed contact point type | ||
| Working voltage - wattage | 12 V -3.4 W or less | |||
| Warning light activation pressure | 15 kPa (0.153 kg/cm2 , 2.2 psi) | |||
| Proof pressure | More than 980 kPa (9.993 kg/cm2 , 142 psi) | |||
| Oil capacity | Total capacity | 6.8 l (7.2 US qt, 6.0 Imp qt) | ||
| Engine oil amount for refill | 5.8 l (6.1 US qt, 5.1 Imp qt) | |||