Drive Pinion Assembly
WARNING: This page is about a different variant/trim than selected.
Preload adjustment of thrust bearing
- Starting torque: 0.3-0.8 N.m (0.03-0.08 kgf-m, 0.2-0.6 ft-lb)
DRIVE PINION ADJUSTING WASHER NO 1 THICKNESS SPECIFICATIONS
| Part No. | Thickness mm (in) |
|---|---|
| 803025051 | 3.925 (0.1545) |
| 803025052 | 3.950 (0.1555) |
| 803025053 | 3.975 (0.1565) |
| 803025054 | 4.000 (0.1575) |
| 803025055 | 4.025 (0.1585) |
| 803025056 | 4.050 (0.1594) |
| 803025057 | 4.075 (0.1604) |
DRIVE PINION ADJUSTING WASHER NO 2 THICKNESS SPECIFICATIONS
| Part No. | Thickness mm (in) |
|---|---|
| 803025059 | 3.850 (0.1516) |
| 803025054 | 4.000 (0.1575) |
| 803025058 | 4.150 (0.1634) |