LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Manual Transmission And Differential) >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

WARNING: This page is about a different car, the 2004 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the bearing outer race to transmission case.
    NOTE: Apply the transmission gear oil to outer surface of bearing outer race.
  2. Install the differential side retainers using ST.

    ST 499787000 WRENCH ASSY

  3. Install the differential assembly.
    NOTE:
    • Be careful not to fold the sealing lip of oil seal.
    • Wrap the right and left spline sections of axle shaft with vinyl tape to prevent scratches.
    Fig 1: Identifying Differential Assembly
    G00937373Courtesy of SUBARU OF AMERICA, INC.
  4. Install the main shaft assembly. < Ref. to INSTALLATION . >
  5. Install the drive pinion assembly. < Ref. to INSTALLATION . >
  6. Install the transmission case. < Ref. to INSTALLATION . >
  7. Install the transfer case with extension case assembly. < Ref. to INSTALLATION . >
  8. Install the manual transmission assembly to vehicle. < Ref. to INSTALLATION . >
scientia non olet · About LEMON Manuals