LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Overhaul Automatic Transmission) >> Oil Pump >> Disassembly

Oil Pump: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove four seal rings.
    CAUTION: Be careful not to damage O-ring.
  2. Remove the oil pump cover.
    NOTE: Lightly tap the end of the stator shaft to remove the cover.
    Fig 1: Removing Oil Pump Cover
    G02053212
  3. Remove the inner and outer rotor.
    Fig 2: Removing Inner And Outer Rotor
    G02053213
scientia non olet · About LEMON Manuals