LEMON Manuals: Even more car manuals for everyone
Home >> Sterling >> 1988 >> 825 SL, 2.5 D >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Shift Control Cable

Shift Control Cable

  1. Remove center console. Place gearshift lever in the "2" position . Loosen cable nut until metal sleeve can slide through grommet. See Fig 1 .
    Fig 1: Adjusting Shift Control Cable
    G82871Courtesy of AUSTIN ROVER GROUP.
  2. Move metal sleeve forward to limit of travel. Tighten cable nut to 13 ft. lbs. (18 N.m). Move gearshift lever to the "N" position.
  3. Loosen cable nut again to allow shift valve to center in its detent. Tighten cable nut. Ensure that transaxle can shift properly through all gear positions.
scientia non olet · About LEMON Manuals