DTC 43: ABS Control System Malfunction: Procedure

1. Clear the DTC. Refer to DTC CHECK / CLEAR [05/2013 - ] .
2. Turn the ignition switch to ON.
3. Check if the same DTC is recorded. Refer to DTC CHECK / CLEAR [05/2013 - ] .
   RESULT
   
   

   Result	Proceed to
   DTC not output (relating to ABS control system DTC)	A
   DTC output (relating to ABS control system DTC)	B

B → See step   4 

A: Go to next step 

1. Turn the ignition switch off.
2. Clear the DTC. Refer to DTC CHECK / CLEAR [05/2013 - ] .
3. Start the engine.
4. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.
5. Check if the same DTC is recorded. Refer to DTC CHECK / CLEAR [05/2013 - ] .
   RESULT
   
   

   Result	Proceed to
   DTC (43) not output	A
   DTC (43) output	B

B → See step   5 

A → See step   3