PCV Valve: Installation: Installation

INSTALL VENTILATION VALVE SUB-ASSEMBLY
1. Apply adhesive to 2 or 3 threads of the ventilation valve.
  
  Fig 1: Applying Adhesive To Threads Of Ventilation Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Adhesive
  
  Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
2. Install the ventilation valve.
  
  Fig 2: Locating Ventilation Valve Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 20 N*m ( 204 kgf*cm, 15 in.*lbf)
3. Connect the ventilation hose.
INSTALL INTAKE MANIFOLD . Refer to INSTALLATION - Step 1
INSTALL ENGINE OIL LEVEL DIPSTICK
INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY (for Automatic Transaxle) . Refer to INSTALLATION - Step 3
INSTALL OIL COOLER TUBE (for Automatic Transaxle) . Refer to INSTALLATION - Step 4
INSTALL STARTER ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL INJECTOR VIBRATION INSULATOR . Refer to INSTALLATION - Step 1
INSTALL NO. 1 DELIVERY PIPE SPACER . Refer to INSTALLATION - Step 3
INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY . Refer to INSTALLATION - Step 4
CONNECT FUEL TUBE SUB-ASSEMBLY . Refer to INSTALLATION - Step 5
INSTALL FUEL PIPE CLAMP . Refer to INSTALLATION - Step 6
CONNECT VACUUM HOSE . Refer to INSTALLATION - Step 7
CONNECT NO. 1 FUEL VAPOR FEED HOSE . Refer to INSTALLATION - Step 8
INSTALL HARNESS BRACKET . Refer to INSTALLATION - Step 9
INSTALL ENGINE WIRE HARNESS . Refer to INSTALLATION - Step 10
INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE . Refer to INSTALLATION - Step 2
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m ( 55 kgf*cm, 48 ft.*lbf)
ADD ENGINE COOLANT . Refer to REPLACEMENT - Step 2
INSPECT FOR COOLANT LEAK . Refer to ON-VEHICLE INSPECTION - Step 1
INSPECT FOR FUEL LEAK
Refer to PRECAUTION
INSTALL NO. 2 CYLINDER HEAD COVER . Refer to INSTALLATION - Step 3
INSTALL ENGINE UNDER COVER RH
Torque: 5.0 N*m ( 51 kgf*cm, 44 ft.*lbf)
INSTALL ENGINE UNDER COVER LH
Torque: 5.0 N*m ( 51 kgf*cm, 44 ft.*lbf)