LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> xD Standard >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Lighting System >> Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM 

    HINT:

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus: Customize Setting /
    5. Select the setting by referring to the table below.

      Main Body (Main Body ECU) 

      CUSTOMIZE PARAMETERS - MAIN BODY (MAIN BODY ECU)

      Display Default Contents Setting
      Lighting Time 15 seconds Changes illumination duration after door closure
      (It will quickly fade out when turning the ignition switch ON)      		 7 5/ 15/ 30 (seconds)
      I/L ON / ACC OFF ON Illuminates light when ignition switch turned to ACC
      (Room light illuminated when interior light switch set to DOOR)      		 ON / OFF
      I/L ON / Unlock ON Function to light up room light when unlocking with door key cylinder
      (Room light illuminated when interior light switch set to DOOR)      		 ON / OFF
scientia non olet · About LEMON Manuals